GrahamR
journeyman
Reged: 13/11/2006
Posts: 78
|
|
Hi all,
Where do you recommend to develop the Ilford XP2.
I understand that if you get it on colour paper it has a sepia colour cast??
Where/how do you get normal B&W from it????
Many thanks
Graham
|
T Sargeant
Jessies' Finest *
Reged: 01/08/2004
Posts: 1866
Loc: Reading, Berkshire
|
|
One of the main problems with XP2 is not that it gives an odd cast, it's that lab operators don't know what to do with it. A lot of places (if they'll even do it!) will just run it through as a colour film with no correction, due to the base layer of C-41 films, you end up with oddly tinged prints. Just make sure that the person running the lab knows to convert it to black and white, this is pretty basic and I've yet to find a minilab that can't.
On another not I'm not a huge fan of XP2 as I find it a little soft and grey most of the time. Having said that I'd reccomend getting on good terms with a good lab operator, my lab manager at Jessops knows to boost the contrast a bit for me and I find the results a lot more pleasing because of it.
--------------------
Tom
CRIPN
"When the only tool you own is a hammer, every problem begins to resemble a nail!"
|
John_K
addict
Reged: 03/09/2006
Posts: 560
Loc: North Yorks
|
|
I develop my own film, but there are the odd times when I have to make prints from XP2 rather than in the darkroom, so I scan it onto a CD as a greyscale image. The image, before being consigned to the CD, is cleaned up, contrast/brightness adjusted, pre-sized, sharpened as necessary and handed to the local lab that works out of the Post Office. The quality of resulting prints are very good indeed.
|
Simon E.
Reged: 16/01/2001
Posts: 717
Loc: Shropshire, England
|
|
Some labs are able to dial out all or most of the purple cast. Take the roll in locally (preferably to one with a half-decent reputation and see if they know what it is and what to do with it. Ask if they can do neutral prints and whether they are prepared to reprint them if you're not happy.
--------------------
Simon.
|
NorthernMonkey
enthusiast
Reged: 01/05/2007
Posts: 271
|
|
Ilford now have a D&P service where they print onto proper black and white paper, rather than colour paper. Its £11 for 36 prints, but they do a really good job.
|
AJUK
Reged: 22/03/2005
Posts: 2655
Loc: UK
|
|
Ask the lab to convert to black and white even though its black and white anyway, that should limit any cast problems.
--------------------
Al
[Insert clever comment here]
|
PentaxManiac
addict
Reged: 19/06/2006
Posts: 400
Loc: North London
|
|
Breaking news!
I posted in the Monochrome Photography section on 26 February this year about the supplement AP gave away with news from the big camera fair in Las Vegas. It was announced that Ilford were bringing their processing back in house. I never knew they'd outsourced it in the first place, but hey ho.
Today I recieved my first set of prints since the change, from a roll of XP2. They are superb - well, as superb as can be expected from my photography. So to answer the original question, my answer is a definite Ilford. The process paid envelopes are not cheap, granted, but 7dayshop for one sell them at a discount.
--------------------
Martin
The observed defines the observer
|
NorthernMonkey
enthusiast
Reged: 01/05/2007
Posts: 271
|
|
What is even better about the Ilford service, is that they will process any black adn white film. So you can shoot HP5, FP4, or TriX instead of XP2
|
AJUK
Reged: 22/03/2005
Posts: 2655
Loc: UK
|
|
Why pay for Ilford and use XP2?
--------------------
Al
[Insert clever comment here]
|
Leyland
newbie
Reged: 13/06/2008
Posts: 4
|
|
Ilford/Harman Tech themselves now run a commercial b/w lab at thier Mobberly site, I know the chemistry is different but I'm almost sure they run a dev service for xp2 aswell
|
PentaxManiac
addict
Reged: 19/06/2006
Posts: 400
Loc: North London
|
|
The dev/print service for black and white - any brand, not just Ilford - has always been there. Until earlier this year it was contracted out. Ilford have brought it back in-house partly because of concerns over quality: certainly I've had mixed results from them in recent years but a recent roll of XP2 was fine, with very good quality printing.
The service offers printing of any black and white film, including XP2 and. presumably, other chromogenic films. I wonder if they process the XP2 in C41 or in the original XP chemistry?
--------------------
Martin
The observed defines the observer
|
numanoid
I'm 'Special'...
Reged: 27/01/2002
Posts: 10156
Loc: Co.Durham
|
|
Whenever i've used XP2 i've used Jessops and been pleased with the results. Wonder if they stil do it-haven't used a b/x film in ages
--------------------
An artist must have the freedom to express himself - Edward Weston
~Larry~
BSRIPN
http://www.members.lycos.co.uk/numanoid27/
|
Previous
Index
Next
Threaded
Edit
Reply
Quote
