View Full Version : Nikon P510
30-04-12, 10:49 PM
Very pleased with the Nikon P510 I bought recently, but surprised it is not possible to purchase (or even fit) a UV filter, which I thought is standard practice, if only to protect the lens. Is this right?
01-05-12, 12:56 AM
Hi. Not unusual for bridge cameras not to have a screw thread on the end of the lens due to the construction and magnification of the lens. Any extra weight would probably cause the lens to malfunction.
As for putting a UV filter on the lens for protection. There is 50/50 for and against, due to it causing flare and it's an extra piece of glass in the way of the final image.
However, I remember using UV filters on my SLR lenses ;)
03-05-12, 11:05 PM
Thanks Chris, not an essential addition then, so I'll forget about it. Cheers.
18-10-12, 10:24 AM
if your standard filter not fit with your camera you can use ring adapter to solve this problem :)
02-12-12, 04:20 PM
I have a p90 bridge and got a jjc lens adapter from Amazon for circular polariser ifor about £20 they just fit over the lens
08-12-12, 12:40 PM
yeah, I have a p90 bridge and got a jjc lens adapter from Amazon for circular polariser ifor about £20 they just fit over the lens http://www.okhealthy.com/youjie/images/10.gif
21-11-13, 08:33 AM
Nikon Corporation was established on 25 July 1917 when three leading optical manufacturers merged to form a comprehensive, fully integrated optical company known as Nippon Kōgaku Tōkyō K.K. Over the next sixty years, this growing company became a manufacturer of optical lenses (including those for the first Canon cameras) and equipment used in cameras, binoculars, microscopes and inspection equipment.
Powered by vBulletin® Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.